- Fig. 1 Spare wheel well: Bass box
Applies to vehicles: with bass box
You must remove the bass box before you can take out the collapsible spare wheel*.
Removing the bass box
Take hold of the handle and fold back the floor panel.
Press together the retaining tabs Fig. 1 -1- on the connector.
Unplug the connector -2- and move the disconnected cable clear to one side.
Turn the plastic knob anti-clockwise.
Carefully take out the bass box.
Installing the bass box
Carefully place the bass box in the well of the rim. Make sure that the inscription "FRONT" on the bass box points to the front of the vehicle.
Plug the connector back in again.
If required, secure the bass box using the plastic knob.
Fold the floor panel back down.